UltraFlux HC/RP
Description
Ultra-flux HC/RP are designed to accommodate flow rates
of up to 500 gpm (113 m3/hr) in a single 60″ (1524 mm)
length filter cartridge. Compared with the general model,
the high flow filter allows a larger size filter element and
reduces investment and production costs.
Ultra-flux RP is specifically designed with the compound
radial pleat produces a more uniform pleat pattern, which, in
turn, allows greater utilization of the media and maximise the
usable surface area by evenly distributing the process fluid
throughout the entire filter structure.
Ultra-flux HC comes with the hard cage design to protect
the filter media over the extreme process conditions. Blown
microfiber forms the basis of the filter media, which is
manufactured to tightly controlled fibre diameter
specifications, producing a media with absolute-rated
particle retention characteristics.
- Hard cage design for media protection for HC model
- Special radial pleated design for RP model to maximise the utilization of media surface area
- Superior filtration area up to 18 m²
- Ultra-high flow rate up to 113m³/hr (Appx 500GPM)
- High dirt holding capacity for different applications
- Broad chemical compatibility for different applications
- Convenient handle for easy change-out
- Nominally rated with retention ratings between 1-100μm at 90-95% efficiencies
- Absolute rated with retention ratings between 1-20μm at 98-99.9% efficiencies
- Silicone free construction
- All polypropylene materials in compliance with FDA regulations for food contact under CFR21
- WATER TREATMENT PLANT
- POWER GENERATION PLANT
- CHEMICALS & PETROCHEMICALS
- OIL & GAS
- FOOD & BEVERAGE